skip to Main Content

Audio Technica AT-VM95E (Elliptical Stylus)

$89.00

Cartridge & Stylus
Frequency Response20-22,000 Hz
Channel Separation20 (dB at 1 kHz)
Vertical Tracking Angle23°
Vertical Tracking Force1.8-2.2 g (2.0 g standard)
Stylus ConstructionBonded round shank
Recommended Load Impedance47,000 ohms
Coil Impedance3.3 k ohms (1 kHz)
DC Resistance485 ohms
Coil Inductance550 mH (1 kHz)
Output Voltage4.0 mV (1 kHz, 5 cm/sec.)
Output Channel Balance2.0 dB (1 kHz)
Stylus Shape0.3 x 0.7 mil elliptical
CantileverAluminum pipe
Static Compliance17 x 10 – 6 cm / dyne
Dynamic Compliance7 x 10 – 6 cm / dyne (100 Hz)
MountingHalf-inch
Cartridge Weight6.1g
Dimensions17.2 mm (0.68″) H × 18.9 mm (0.74″) W × 28.3 mm (1.20″) D
Accessories IncludedTwo 11 mm installation screws, two 8 mm installation screws, two washers
ModelAT-VM95E
Mounting FeatureHalf-inch mount
Recommended Load Capacitance100 to 200 pF
Replacement StylusAT-VMN95E
Stylus Size0.3 x 0.7 mil
TypeVM Stereo Dual Magnet
Weight6.1 g (0.22 oz)
Wire Used for CoilT.P. Copper

Description

  • VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminum cantilever
  • Specially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
  • Compatible with any AT-VMN95 replacement stylus
Back To Top preloader