skip to Main Content

Audio-Technica AT-LPW40WN

Category: Brand:

$449.00

Type2-speed, fully manual operation
MotorDC servo motor w/speed stability control
Drive MethodBelt drive
Speeds33-1/3 RPM, 45 RPM
Turntable PlatterDie-cast aluminum
Wow and Flutter0.15% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio>60dB
Output LevelPre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain35 dB nominal, RIAA equalized
Power Supply Requirements100-240V AC, 60 Hz
Power Consumption1 W
Dimensions420.0 mm (17.13″) W x 340.0 mm (13.90″) D x 116.9 mm (5.04″) H
Weight4.7 kg (10.4 lbs.)
Accessories IncludedAT-VM95E phono cartridge; AT-HS4 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; rubber mat; dust cover; 45 RPM adapter

 

Description

  • The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

    The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

    • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM

 

    • Motor features a speed-sensor system to maintain accurate platter rotation speed

 

    • Fully manual operation

 

    • Adjustable dynamic anti-skate control

 

    • Professional anti-resonance, die-cast aluminum platter with rubber mat

 

    • AT-HS4 universal ½”-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus

 

    • AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

 

    • Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest

 

    • Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer

 

    • Built-in switchable phono pre-amplifier for phono or line-level output

 

    • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

 

  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Additional information

Colour

Black, Silver

Back To Top preloader